下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\WIN\INTELINF 」,如不想变更请直接按「 Next 」
按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\WIN\IMSM 」,如不想变更请直接按「 Next 」
按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\WIN\ETHERNET 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 "C:\DRIVERS\WIN\WLLANATH 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选择「 I accept the terms in the license agreement 」,按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\W2K\ACCON 」,如不想变更请直接按「 Next 」
解压缩完成,按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreemen 」按「 Next 」
档案预设解压缩路径为 "C:\DRIVERS\WIN\DISPLAY" ,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
3. 到「 C:\DRIVERS\WXP\DISPLAY 」里,双击「 Setup.exe 」
出现欢迎画面,按「 Next 」
License Agreement 画面,按「 Yes 」
接下来的画面显示将开始安装驱动程序
安装完成后,选择「是,立即启动计算机」,按「完成」,并且重新开机
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\Drivers\WIN\MONITOR 」,如不想变更请直接按「 Next 」
按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩在路径为「 C:\DRIVERS\WIN\Audio 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\HDAMODEM 」,如不想变更请直接按「 Next 」。
解压缩完成后按「 Finish 」
3. 到「 C:\DRIVERS\HDAMODEM 」里,双击 SETUP.exe
首先出现「驱动程序安装精灵」,按「确定」
画面会显示安装进度
出现「 NetWaiting 安装精灵 」,按「下一步」
授权合约画面,按「是」
预设安装路径为「 C:\Program Files\NetWaiting 」,按「下一步」
接下来为选择程序安装夹,如果不想变更,直接按「下一步」
安装完毕后选,按「完成」
出现「 Digital Line Detection 安装精灵 」,按「下一步」
授权合约画面,按「是」
预设安装路径为「 C:\Program Files\Digital Line Detect 」,按「下一步」
接下来为选择程序安装夹,如果不想变更,直接按「下一步」
安装完毕后选,按「完成」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\W2K\PWRMGR 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\WIN\IBMPM 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
3. 到「 C:\DRIVERS\WIN\IBMPM 」里,双击「 Setup.exe 」
出现欢迎画面,按「 Next 」
安装完成后,请选择「 Yes, I want to restart my computer now. 」,并按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\WIN\UNAV 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
3. 到「 C:\DRIVERS\WIN\UNAV 」里,双击「 Setup.exe 」
首先出现「选取安装语言」,选「英语」,按「确定」
按「 Next 」
按「 Next 」
安装完毕后选「 Yes, I want to restart my computer now 」,按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选择「 I accept the terms in the license agreement 」,按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\WIN\HOTKEY 」,如不想变更请直接按「 Next 」
解压缩完成,按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\TPBTooth 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
3. 要开始安装驱动程序前,请「务必」遵守以下几点规则,以免安装失败 !
在安装此版 Bluetooth 软件前,移除掉先前功能旧版的 Bluetooth 软件
Bluetooth 软件安装时, 「不要」 任意碰触键盘、 TrackPoint 、 TouchPad 。
将 ThinkPad 的「无线硬件开关」打开,确认 LCD 下方蓝芽标志有亮。或是按下「 Fn+F5 」热键,确定闭蓝芽无线通讯功能已开启
十八 、安装 IBM fingerprint reader software for Windows 2000, XP
1. 由于原厂网站上尚未提供驱动程序下载,请点击这里下载5.6版。
下载此文件于硬盘后,双击执行「 setup.exe √狍,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\WIN\FPS 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
下载此文件于硬盘后 ,双击执行「 DPInst.exe √狍,按「下一步」
按「完成」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\WIN\FPS 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
二十 、安装 ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\WIN\HPROTECT 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
3. 到「 C:\DRIVERS\WIN\HPROTECT 」,双击「 Setup.exe 」
出现欢迎画面,按「下一步」
按「安装」
按「完成」
按「是」,重新开机。
二十一 、安装 Atmel TPM (Trusted Platform Module) device driver for Windows Vista 32-bit, XP, 2000
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\WIN\TPM 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\W2K\EZEJECT 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」
下载此文件于硬盘后,双击执行后,按「 Next 」
License Agreement 画面,选「 I accept the terms in the license agreement 」按「 Next 」
档案预设解压缩路径为「 C:\DRIVERS\W2K\PDIRECT 」,如不想变更请直接按「 Next 」
解压缩完成后按「 Finish 」