笔记本硬盘最强音:东芝5400转/16M缓存100G MK1032GAX上市
 
全新盘 保修一个月 
售价 1099元  NBCLUB VIP用户另有优惠 
 
 
 
技术参数: 
   Features 
  
    Part number 
 HDD2D08*ZE  
    Formatted capacity 
 100,030MByte  
    Form factor 
 2.5inch  
    Interface type 
 ATAPI/IDE  
  
    Supported interface standards 
 ATA-2  
ATA-3  
ATA-4  
ATA-5  
ATA-6  
  
    Head/actuator technology 
 "Ramp-Load" Technology  
GMR head  
  
    Shock detection 
 Shock sensor circuit  
    S.M.A.R.T. 
 The SMART command set is supported.  
    Bytes/sector 
  
     Bytes/sector 
 512  
   Physical parameters 
  
    Number of platters 
 2  
    Number of cylinders 
 69,840  
    Number of heads 
 4  
   Access times 
  
    Average seek time 
 12ms  
    Maximum seek time 
 22ms  
    Track-to-track seek time 
 2ms  
   Transfer rates 
  
    Internal 
 From 230.6 to 446 MBit/s 
  
    PIO mode (Host) 
 PIO mode 4 (16.6 MByte/s)  
    UDMA mode (Host) 
 UDMA mode 5 (100 MByte/s)  
   Rotational speed 
  
    Rotational speed 
 5,400rpm  
   Buffer 
  
    Buffer size 
 16,384kByte  
    Cache 
 Read-ahead cache  
Write cache  
  
   Reaction times 
  
    Start time (Spin-up time, typical) 
 4s  
    Start time (Spin-up time, maximum) 
 10s  
    Recovery time (from stand-by, typical) 
 4s  
    Recovery time (from stand-by, maximum) 
 10s  
  Reliability specifications 
  
   Seek error rate 
 1 error per 10^6 seeks  
   Non-recoverable error rate 
 1 error per 10^13 seeks  
   MTBF 
 300,000Hours  
   Power-on hours 
 2,800Hours  
   Product life 
 5 years or 20,000 POH (whatever comes earlier)  
   Preventive maintenance 
 No preventive maintenance is required  
    Source voltage 5 V 
  
     Start (Maximum) 
 4.5W  
     Seek (Average) 
 2.4W  
     Read (Average) 
 2.0W  
     Write (Average) 
 2.0W  
     Low-power idle (Average) 
 0.65W  
     Sleep (Average) 
 0.1W  
     Stand-by (Average) 
 0.18W  
   Power supply motor 
  
    Supply voltage 
 +5 V (+/- 5 %)  
  
    Allowable noise/ripple 
 Max. 100mV  
   Power supply logic 
  
    Supply voltage 
 +5 V (+/- 5 %)  
  
    Allowable noise/ripple 
 Max. 100mV  
   Cable 
  
    Length ATAPI cable (Maximum) 
 0.46m  
    Capacitance ATAPI cable (Maximum) 
 35pF  
  Mechanical specifications 
  
   Drive width 
 69.85mm  
   Drive height 
 9.5mm  
   Drive depth 
 100mm  
   Drive weight 
 0.102kg  
   Drive orientation 
 The drive can be installed in all axes (6 directions)  
   Mounting instructions (Screwing) 
 Four screws should be tightened equally with 0.39 Nm torque. The depth should be 3.0 mm minimum and 3.5 mm maximum  
   Temperature 
  
    Operating 
 From 5 to 55 °C 
  
    Non-operating 
 From -20 to 60 °C 
  
    Shipping 
 From -40 to 70 °C 
  
   Humidity 
  
    Operating 
 From 8 to 90 % 
  
    Non-operating 
 From 8 to 90 % 
  
    Shipping 
 From 5 to 90 % 
  
   Wet bulb 
  
    Operating (Maximum) 
 29°C  
    Non-operating (Maximum) 
 40°C  
   Vibration 
  
    Operating (Maximum) 
 1 G, with 5 - 500 Hz  
    Non-operating (Maximum) 
 5 G, with 15 - 500 Hz  
   Shock 
  
    Operating (Maximum) 
 325 G, with 2 ms half sine wave  
    Non-operating (Maximum) 
 850 G, with 1 ms half sine wave  
    Shipping (Maximum) 
 0.7 m free drop with no unrecoverable error. Drive must be packed in Toshiba´s original shipping package. Apply shock in each direction of the drive´s three mutually perpendicular axes, one axis at a time.  
   Altitude 
  
    Operating 
 From -300 to 3,000 m 
  
    Non-operating 
 From -400 to 15,000 m 
  
   Acoustic noise 
  
    Idle mode (Disk spinning) 
 Max. 25dB  
    Random seek 
 Max. 28dB  
  BIOS specifications 
  
   Number of cylinders (Logical) 
 16,383  
   Number of heads (Logical) 
 16  
   Number of sectors/track (Logical) 
 63  
  Safety specifications 
  
   Safety standards 
 CSA C22.2, No. 60950-00  
D 33003  
EN60950  
UL 60950  
  
   EMC adaptibility 
 EN55022  
EN61000-3-2  
EN61000-3-3  
EN61000-4-2  
EN61000-4-3  
EN61000-4-4  
EN61000-4-5  
EN61000-4-6  
EN61000-4-11  
ENV50204   
 |