[驱动更新] Nvidia Display Driver for SUSE Linux：ThinkPad R61, T61—其他版本LINUX也可以用

bobwu

This package installs the software (display driver) to enable the following video chips on the system board. - NVIDIA Quadro NVS 140M The following systems are supported: - ThinkPad R61 - ThinkPad T61 Note: - Refer to marketing materials to find out what ThinkPad models support which video chips. - If this package has been installed, updating (overwrite-installing) this package will fix problems, add new functions, or expand functions as noted below. - This program is language independent and can be used with any language system.

File details

Version: 100.14.29 Release Date: 2008/02/08 下载地址： ftp://ftp.software.ibm.com/pc/pccbbs/mobiles/l7kv07us.zip

Summary of changes

Version 100.14.29

• (Fix) Intermittent Suspend to Disk takes a long time

Version 100.14.27

• (Fix) Cannot Disable Thermal Monitor timers in Nvidia Xserver set

Version 100.14.26

• (New) Initial release

Installation instructionsNotes:
-You need to install Kernel development (Kernel Source code) and C/C++ Compiler before installing the Video driver. (See how to install Kernel Source and C/C++ Compilers)
-Preloaded systems come with RPM installed nvidia driver; this should be uninstalled first before installing <nvidia>.run driver. (See how to uninstall nvidia RPM driver)

• Start SUSE Linux.
• In a terminal window, use the su (switch user) command to obtain root privileges.
• Copy l7kv07us.run file to the hard drive, for example, /home/drivers directory.
• Type init 3 to run in console without the X server.
• Change directory to the location where you saved the file.
• Type sh l7kv07us.run to install the driver.
• Type nvidia-xconfig
• Type init 6 to reboot

How to Silent Install the Driver:
1. At runlevel 3 run sh ./l7kv07us.run -s -X

• Note:
  • -s = silent installation
  • -X = configures xorg.conf to use nvidia driver

UninstallUninstall <nvidia>.run

• Start SUSE Linux
• In a terminal window, use the su (switch user) command to obtain root privileges.
• Type nvidia-installer --uninstall
• Type sax2 -r
• Go to Computer > Shutdown, and select Restart Computer.

Uninstall nvidia RPM package:

• Start SUSE Linux
• In a terminal window, use the su (switch user) command to obtain root privileges.
• See what RPM package is installed.
  • -Two rpm packages should be uninstalled:
    • X11-video-nvidiaG01-lenovo-xx
    • nvidia-gfxG01-lenovo-kmp-smp-xx_yy

Note:

• xx = refers to the driver version
• yy = refers to the kernel version

Run rpm -e <x11-video-nvidiag01-lenovo-xx> <nvidia-gfxg01-lenovo-kmp-smp-xx_yy>Determining which version is installedIn a terminal window, type nvidia-settings -q NvidiaDriverVersion to display the current version of nvidia driver installed in the system
*Determining if 3D is enabled:
In a terminal window, type nvidia-settings -g | grep OpenGL and confirm OpenGL vendor string indicates Nvidia Corporation.
Example:

• OpenGL vendor string: NVIDIA Corporation
• OpenGL renderer string: Quadro NVS 140M/PCI/SSE2
• OpenGL version string: 2.1.1 NVIDIA 100.14.27

cq84lc

支持!!!

fys

老大怎么知道我装了suse?